👇 Choose your device below and scroll down to see the installation guide
Important:
Your purchase includes the IPTV subscription only. The player app is not included.
V12Mate is free on Android and Firestick, while other apps may charge a license fee after the free trial.
Example: Think of the subscription as fuel — you still need a car (the app) to drive.
Your purchase includes the IPTV subscription only. The player app is not included.
V12Mate is free on Android and Firestick, while other apps may charge a license fee after the free trial.
Example: Think of the subscription as fuel — you still need a car (the app) to drive.
Fire TV Stick Setup Guide
V12Mate
No Server Address Needed
Very Important: If you already have Tivimate installed, please uninstall it first — otherwise V12mate will not install
Choose Your Learning Style
Android TV Setup Guide
V12Mate
Perfect Player
TiviMate
Compatible devices: Sony, TCL, Hisense, Philips, Nvidia Shield, Chromecast with Google TV, Mi Box, and most Android TV boxes
Method 1: Using Downloader App
-
Search for Downloader in the Play Store and tap Install
-
Press Allow when prompted
-
Click OK to confirm and proceed
-
Downloader is ready — now install V12Mate
-
Enter the Downloader code for V12Mate: 2494311 → press GO
-
Accept Privacy Policy → Install → confirm Install again if asked
-
Press Install → wait until installed
-
When complete, press OPENVery Important: If you already have Tivimate installed, please uninstall it first — otherwise V12mate will not install
-
Press Add playlist
-
Press V12MATEIf you only see “Cancel”, click this link to fix it 👉 CLICK HERE
-
Enter your Credentials - (No server URL is needed since it’s our player.)
-
Press Next, Make sure to keep VOD and TV channels selected
-
Wait for it to process, (about 1 minute)
-
Press Done, wait few seconds. You're ready to watch!If No Channels Load And Content Count Doesn’t Show, Your Login Details Are Wrong. Go to Settings → Playlists → V12Mate → Xtream Codes Parameters and double-check your username and password, including capital letters. If they’re incorrect, no channels will appear
The EPG (guide information) loads in the background. Please give it some time, and you can view it in Settings → EPG
Note: You should go to Settings > Security & Restrictions, select the app, and toggle Allow unknown apps if installing from outside Play Store.
Method 2: Google Play Store (If V12Mate doesn’t work for you)
-
Open Google Play Store on your Android TVVery Important: VOD on TiviMate only works with their Premium. Our service (trial & subscription) already has VOD built in.
-
Search for TiviMate IPTV Player and click Install
-
Open TiviMate, select Add Playlist, choose Xtream Codes
-
Enter your IPTVV credentials (Server URL, Username, Password)
Frequently Asked Questions
What is V12Mate and how does it work?
▸
V12Mate is an IPTV player that enables users to stream live TV channels and on-demand content. It connects to an IPTV provider's servers and displays content on your Android TV device.
Is V12Mate compatible with my Android TV device?
▸
V12Mate is compatible with most Android TV devices running Android 5.0 or higher. Check your system version in Settings > About.
Benefits of upgrading to TiviMate Premium?
▸
Premium provides extra features including enhanced support, more customization options, multiple playlist support, and improved performance.
Can I use V12Mate with any IPTV provider?
▸
V12Mate only works with our service because it is our own dedicated player, and it’s free with your subscription.
Is TiviMate owned by IPTVV Canada?
▸
No, TiviMate is not owned by IPTVV Canada. We only own and support our own player, V12Mate. TiviMate is a third-party player, we don’t own or control it, and it also requires a premium license to unlock all features.
iPhone & iPad Setup Guide
iMPlayer
Smarters Player Lite
Method 1: iMPlayer Setup (Recommended)
-
Download iMPlayer - IPTV Player from App Store:
Download from App Store
-
Open the app and click on "Add a Playlist"
-
Select playlist type "XC API"
-
Fill in your details:
• Playlist Name: Choose any name you want
• Portal URL: Enter the server URL we sent you by email
• Username & Password: Use the credentials provided in the email -
Click "Add Playlist" wait until contents finish downloading and enjoy streaming!
Method 2: Smarters Player Lite Setup
-
Open app and tap Add User, select Login with Xtream Codes API
-
Use the login details provided to you after subscribing. Then click on "ADD USER" to continue
-
Wait a few seconds for the app to process your details
-
Tap the "Live TV" icon to start watching
-
Select the channel category you want to browse and tap a channel name to play it
Tip: For better performance on iOS devices, ensure you're connected to a stable WiFi network. Cellular data may cause buffering issues.
Frequently Asked Questions
Which app is best for iOS devices?
▸
iMPlayer is our recommended choice for its simplicity and reliability. Smarters Player Lite is also excellent for beginners. Both work perfectly with IPTV subscriptions.
Do I need to jailbreak my Apple TV?
▸
No, all recommended apps are available directly from the App Store. No jailbreak required.
Can I use these apps on Apple TV?
▸
Yes! iMPlayer and other IPTV apps support Apple TV. You can also use AirPlay to stream from your iPhone/iPad to Apple TV.
Why is EPG not loading?
▸
Make sure "Auto-update EPG" is enabled in app settings. Some providers may take a few minutes to load the full guide.
Windows & Mac Setup Guide
IPTV Smarters Pro
MyIPTV Player
VLC Player
Method 1: IPTV Smarters Pro Setup
-
Open a browser and type "IPTV Smarters Pro" into the search bar
-
Go to the official website: https://www.iptvsmarters.com
-
Click on the "Downloads" section in the website menu
-
Download the Windows or Mac version of IPTV Smarters Pro
-
Once the download completes, open the installer by clicking on the downloaded file
-
If Windows asks for permission, click "Yes" to allow the app to install
-
The installation will now begin. It typically takes under 2 minutes
-
Once installed, launch the IPTV Smarters app. Click Add New User, then choose "Login with Xtream Codes API"
-
Enter your IPTV account details: Username, Password, and Portal URL
-
That's it! You're ready to start streaming with IPTV Smarters Pro
Method 2: MyIPTV Player (Windows 10/11)
This is a powerful media player with built-in EPG support for Windows 10, Windows Phone, and Xbox One.
Download from Microsoft Store
-
Go to the Settings tab, then click on "Add new playlist and EPG source"
-
Add your M3U playlist:
• Name: Give your playlist a name (e.g. "IPTVV")
• URL: Paste the M3U link you received from your IPTV provider
• Click on Add remote list
-
Go back to Settings and choose your playlist from the Select Channel Playlist dropdown
-
Done! Go to the Channels tab, choose your country, and start watching your favorite TV and VOD content
Tip: For best performance on PC/Mac, use a wired ethernet connection when possible. WiFi may cause buffering during HD/4K streams.
Frequently Asked Questions
Which app works best on Windows/Mac?
▸
IPTV Smarters Pro offers the most features and works on both Windows and Mac. MyIPTV Player is great for Windows 10/11 users who prefer Microsoft Store apps.
Can I use VLC Player for IPTV?
▸
Yes, VLC can play M3U playlists. Go to Media > Open Network Stream and paste your M3U URL. However, dedicated IPTV apps offer better features.
System requirements for IPTV apps?
▸
Windows 7 or newer, Mac OS X 10.10 or newer. At least 4GB RAM and a stable internet connection (25+ Mbps recommended).
Can I record shows on PC/Mac?
▸
Some apps like IPTV Smarters Pro support recording features. Check your IPTV provider's terms of service regarding recording content.
Android Phone & Tablet Setup Guide
iMPlayer Mobile
TiviMate Mobile
Perfect Player
Requirements: Android 5.0 or higher, stable WiFi or 4G/5G connection
Method 1: iMPlayer Setup (Recommended)
-
Download iMPlayer - IPTV Player from Google Play Store:
Download from Google Play Store
-
Open the app and click on "Add a Playlist"
-
Select playlist type "XC API"
-
Fill in your details:
• Playlist Name: Choose any name you want
• Portal URL: Enter the server URL we sent you by email
• Username & Password: Use the credentials provided in the email -
Click "Add Playlist" wait until contents finish downloading and enjoy streaming!
Method 2: TiviMate Mobile Setup (Google Play)
-
Open Google Play Store and search for TiviMate IPTV PlayerVery Important: VOD on TiviMate only works with their Premium. Our service (trial & subscription) already has VOD built in.
-
Tap Install and wait for completion
-
Open TiviMate, tap Add Playlist
-
Select Xtream Codes or M3U Playlist based on what your provider gave you
-
Enter IPTVV credentials:
• Server: Your provider's server URL
• Username: Your username
• Password: Your password
Then tap Next -
Wait for channels to load, then start watching!
Method 3: Official APK Installation
Use this if TiviMate doesn't appear in Play Store on your device.
-
Go to the official site: tivimate.com and download the APK
-
Allow installs from unknown sources if prompted (Settings > Security)
-
Open the file to install TiviMate, then launch the app
-
Follow the same steps as above to add your IPTV playlist
Data tip: Use WiFi when possible. Streaming uses approximately 1GB per hour at standard quality, 3GB per hour at HD quality.
Battery optimization: Streaming drains battery quickly. Consider disabling battery optimization for your IPTV app in Settings > Battery > App battery management.
Frequently Asked Questions
Does TiviMate include channels or an IPTV service?
▸
No, TiviMate is just the player. You need an active IPTV subscription and playlist details from a provider.
Why do I see "invalid" when logging into TiviMate?
▸
Double-check the host/username/password. Typos are common. Make sure there are no extra spaces and the URL starts with http:// or https://
Free vs Premium - do I need TiviMate Premium?
▸
Premium enables multiple playlists, advanced EPG, and layout options. The free version works fine for basic IPTV use with one playlist.
Best practices to reduce buffering on mobile?
▸
Use 5 GHz WiFi, close background apps, reduce stream quality if needed, or try a VPN if your ISP throttles streaming.
Can I cast to TV from my phone?
▸
Yes, most IPTV apps support Chromecast. Look for the cast icon in the player. You can also use screen mirroring on compatible TVs.
What internet speed is recommended?
▸
For smooth streaming: 10 Mbps for SD, 25 Mbps for HD, 50+ Mbps for 4K. Test your speed at fast.com
Roku Device Setup Guide
Hot Player
Perfect Player
Compatible Models: All Roku devices including Roku TV, Roku Ultra, Roku Streaming Stick, and Roku Express
Step 1: Search for Hot Player
-
On your Roku device, open the Roku Channel Store
-
In the search bar, type "Hot IPTV" or "Hot Player"
-
Select Hot Player from the search results
-
Click "Add Channel" to install the app on your Roku device
Step 2: Get Your Device Credentials
-
Open the Hot Player app on your Roku device
-
You will see your MAC Address displayed on the screen. Write this down or take a photo - you'll need it for the next step
Step 3: Configure Your Playlist Online
-
On your phone, tablet, or computer, visit: https://hotplayer.app
-
Click on "Upload List" in the menu
-
Enter the MAC Address from your Roku device, then click "Next"
-
Change Source to "Xtream Code"
-
Fill in your IPTV playlist details:
• Playlist Name: Enter any name you want (e.g., "My IPTV")
• Host: Your Server Address
• Username: Your IPTV username
• Password: Your IPTV password
Then click "Save" -
Return to your Roku device click Refresh or restart the Hot Player app
-
Your IPTV channels should now load. You're ready to start watching!
Tip: For best streaming quality on Roku, ensure your device is connected to a stable internet connection with at least 25 Mbps for HD content and 50+ Mbps for 4K content.
Frequently Asked Questions
Where do I find the MAC Address on my Roku?
▸
The MAC Address is displayed in the Hot Player app under the "Account" section. It's automatically generated when you first open the app on your Roku device.
What if Hot Player isn't available in my region or Roku device?
▸
Hot Player availability varies by region and Roku device. You can try changing your Roku account region or use alternative IPTV apps like IBO Player Pro, GSE Smart IPTV, or other apps that are available in the Roku Channel Store.
How much does Hot Player cost?
▸
Hot Player costs $9 CAD for 1 year or $21 CAD for a lifetime license. The app itself doesn't include any channels or content — users need to use their own IPTV subscription.
Can I use multiple playlists on one Roku device?
▸
Yes, Hot Player supports multiple playlists. You can add several playlists through the web interface at hotplayer.app and easily switch between them on your Roku device.
Why are my channels not loading?
▸
Common solutions: Check your internet connection is stable, verify your IPTV credentials (server, username, password) are correct, ensure your IPTV subscription is active, restart the Hot Player app, or contact your IPTV provider for support.
Which Roku devices support Hot Player?
▸
Hot Player is available on most Roku devices including Roku TV, Roku Ultra, Roku Streaming Stick, and Roku Express. Availability may vary by region - check the Roku Channel Store to confirm.
Smart TV Setup Guide - All Brands
Hot Player
Perfect Player
Compatible Models: All Smart TV brands including LG WebOS, Samsung Tizen, Sony Android TV, TCL, Hisense, Vizio, and other major brands
Important: If your Smart TV has the Google Play Store, please follow the Android TV tutorial instead of this one.
Step 1: Search for Hot Player
-
On your Smart TV, open your App Store (LG Content Store, Samsung Apps, etc.)
-
In the search bar, type "Hot IPTV" or "Hot Player"
-
Select Hot Player from the search results
-
Click "Install" or "Download" to install the app on your Smart TV
Step 2: Get Your Device Credentials
-
Open the Hot Player app on your Smart TV
-
You will see your MAC Address displayed on the screen. Write this down or take a photo - you'll need it for the next step
Step 3: Configure Your Playlist Online
-
On your phone, tablet, or computer, visit: https://hotplayer.app
-
Click on "Upload List" in the menu
-
Enter the MAC Address from your Smart TV, then click "Next"
-
Change Source to "Xtream Code"
-
Fill in your IPTV playlist details:
• Playlist Name: Enter any name you want (e.g., "My IPTV")
• Host: Your Server Address
• Username: Your IPTV username
• Password: Your IPTV password
Then click "Save" -
Return to your Smart TV click Refresh or restart the Hot Player app
-
Your IPTV channels should now load. You're ready to start watching!
Tip: For best streaming quality on Smart TV, ensure your device is connected to a stable internet connection with at least 25 Mbps for HD content and 50+ Mbps for 4K content.
Frequently Asked Questions
Where do I find the MAC Address on my Smart TV?
▸
The MAC Address is displayed in the Hot Player app under the "Account" section. It's automatically generated when you first open the app on your Smart TV.
What if Hot Player isn't available in my region or TV brand?
▸
Hot Player availability varies by region and TV brand. You can try changing your Smart TV account region or use alternative IPTV apps like Smart IPTV, GSE Smart IPTV, or IBO Player that are available in your TV's App Store.
How much does Hot Player cost?
▸
Hot Player costs $9 CAD for 1 year or $21 CAD for a lifetime license. The app itself doesn’t include any channels or content — users need to use their own IPTV subscription.
Can I use multiple playlists on one Smart TV?
▸
Yes, Hot Player supports multiple playlists. You can add several playlists through the web interface at hotplayer.app and easily switch between them on your Smart TV device.
Why are my channels not loading?
▸
Common solutions: Check your internet connection is stable, verify your IPTV credentials (server, username, password) are correct, ensure your IPTV subscription is active, restart the Hot Player app, or contact your IPTV provider for support.
Which Smart TV brands support Hot Player?
▸
Hot Player is available on most major Smart TV platforms including LG WebOS, Samsung Tizen OS, Android TV (Sony, TCL, Hisense), and some other brands. Availability may vary by region - check your TV's app store to confirm.
BuzzTV Setup Guide
XC API Login
Recommended
Compatible Models: BuzzTV XPL 3000, XRS 4000, XRS 4500, E2000, and all BuzzTV Android boxes
Method 1: XC API Login (Recommended)
-
From your BuzzTV home screen, navigate to Server Settings
-
Select XC API Login → Add XC API Login
-
Configure your Xtream Codes connection:
• Portal Name: Enter any name (e.g., "My IPTV")
• Portal URL: Enter your server URL
• User name: Enter your IPTV username
• Password: Enter your IPTV password
-
Press "Connect" or "Save" to establish the connection
-
Return to home screen and select Live TV to start watching!
Frequently Asked Questions
What's the difference between XC API Login and MAC Server?
▸
XC API Login uses username/password (Xtream Codes), while MAC Server uses your device's MAC address. XC API Login is more flexible and recommended for most users.
Which method should I use?
▸
Use XC API Login if your provider gave you a username and password. Use MAC Server only if your provider specifically requires MAC address authentication.
Why won't my channels load?
▸
Verify your credentials are correct, ensure stable internet connection, check that you're using the correct connection method (XC API vs MAC), and try restarting the BuzzTV app.
Can I use multiple IPTV services on BuzzTV?
▸
Yes, you can configure multiple connections in Server Settings and switch between different IPTV providers easily from the home screen.
Formuler/Dreamlink Setup Guide
MyTVOnline 2 & 3
DOL2 App
Compatible Models: Formuler Z8, Z10, Z11, GTV, and all Formuler Android TV boxes
Formuler Z: MyTVOnline 2 & 3
-
Open MyTVOnline 2 or 3 from your Formuler home screen
-
Navigate to Menu → Connections → Add Portal
-
Configure your Xtream Codes connection:
• Portal Name: Enter any name (e.g., "My IPTV")
• Portal URL: Enter your server URL
• Login Required: Enable this option
• Username: Enter your IPTV username
• Password: Enter your IPTV password -
Press "Connect" to establish the connection
-
Your channels should now load and you're ready to watch!
Dreamlink: DOL2 App
-
Open DOL2 App from your Dreamlink home screen
-
Go to Menu → Portals → Edit Portal
-
Enter your portal configuration:
• Portal Title: Any name you prefer
• Portal URL: Your IPTV server URL
• Login Required: Yes, activate this
• Username: Your credentials
• Password: Your credentials -
Save the configuration and restart the app to connect
Important: Unlike MAG boxes, Formuler and Dreamlink boxes don't require MAC address registration. You only need your username and password credentials from your IPTV provider.
Example Configuration:
Portal: http://iptv-server.com
Username: abcdef
Password: 123456
Portal: http://iptv-server.com
Username: abcdef
Password: 123456
Frequently Asked Questions
What's the difference between MyTVOnline 1 and 2?
▸
MyTVOnline 2 is the newer version with improved interface and better Xtream Codes support. We recommend using MyTVOnline 2 for better performance.
Do I need to register MAC address for Formuler?
▸
No, Formuler boxes use Xtream Codes login method, so you only need username and password from your IPTV provider.
Why won't my channels load?
▸
Check that "Login Required" is enabled, verify your credentials are correct, ensure stable internet connection, and try restarting the MyTVOnline app.
Can I use multiple IPTV services on Formuler?
▸
Yes, you can configure multiple portals in MyTVOnline and switch between different IPTV providers easily.
